Wi-Fi Configurator is in German

This Software will allow you to connect the HomeStation to your preferred Wi-Fi network. The Windows version it is currently in German and will be replaced soon. In the meantime, please use this guide to help you: 

Ensure the HomeStation is not connected to the computer when you start the software.f it is it won't work and you need to unplug it and re-start the software.

1- Open the software. You should see the following screen:

It is asking you to plug in the HomeStation with the USB cable provided. It is very important you don't use a different USB cable, even if it looks the same and the HomeStation LED lights up. This is a vary common mistake.

After a while you should see the following screen:

2- Select your Wi-Fi

If you don't see your Wi-Fi, press on this icon:   Once you have selected the Wi-Fi and entered your password, click on the button below that says: Hinzufügen

3- Network successfully added

If you see this message you are good to go, (if not, look at step 4 below).

Press OK and you will see your Wi-Fi appear on the known Wi-Fi section on the right (Bekannte Netzwerke). You will then see this screen:

Please click on Weiter and you are good to go. You can disconnect the HomeStation and continue with the registration process.

4- Error

If this message appears please check your password and try again.